Workability is the ability of a fresh (plastic) concrete mix to fill the form/mold properly with the desired work (vibration) and without reducing the concrete's quality. Workability depends on water content, aggregate (shape and size distribution), cementitious content and age (level of hydration) and can be modified by adding chemical admixtures, like superplasticizer. Raising the water content or adding chemical admixtures increases concrete workability. Excessive water leads to increased bleeding or segregation of aggregates (when the cement and aggregates start to separate), with the resulting concrete having reduced quality. The use of an aggregate blend with an undesirable gradation can result in a very harsh mix design with a very low slump, which cannot readily be made more workable by addition of reasonable amounts of water. An undesirable gradation can mean using a large aggregate that is too large for the size of the formwork, or which has too few smaller aggregate grades to serve to fill the gaps between the larger grades, or using too little or too much sand for the same reason, or using too little water, or too much cement, or even using jagged crushed stone instead of smoother round aggregate such as pebbles. Any combination of these factors and others may result in a mix which is too harsh, i. e. , which does not flow or spread out smoothly, is difficult to get into the formwork, and which is difficult to surface finish.
Use our keyword tool to find new keywords & suggestions for the search term Concrete. Use the keywords and images as guidance and inspiration for your articles, blog posts or advertising campaigns with various online compaines. The results we show for the keyword Concrete will change over time as new keyword trends develop in the associated keyword catoegory and market. For optimum results we recommend just searching for one keyword.